Citywide guide
Epoxy Flooring Across Irving, TX
From 1950s ranch homes in the south to Las Colinas towers and Valley Ranch cul-de-sacs, Irving's floors vary as much as its neighborhoods. Here is what to know before you coat.
How Irving Shapes the Floor You Need
Irving sits between Dallas and the airport, and it has grown in layers. The south side filled in after World War II with modest ranch homes. Las Colinas rose from ranch land beginning in the 1970s. Valley Ranch and the northern neighborhoods followed in the 1980s and 1990s. Each era poured its slabs differently, and that shows up when it is time to coat them.
Older garages tend to have more cracks, more oil and sometimes a coat of old paint. Newer slabs are flatter but may still carry the curing compound from construction, which has to come off before any resin will bond. Condo and townhome garages in the middle of the city are often smaller and come with HOA rules about scheduling.
Whatever the age of the home, the same preparation applies: grind, repair, then coat. The neighborhood guides below go deeper on three parts of the city.
Local notes
Irving at a Glance
Irving counted about 256,700 residents in the 2020 census, making it one of the larger cities in North Texas. The City of Irving covers neighborhoods from Las Colinas to the south side.
Football history runs deep here: Texas Stadium stood in Irving from 1971 until its implosion in 2010, as the UNT Libraries recount, and the team's practice headquarters sat in Valley Ranch until 2016. Today the city is better known for corporate offices, the Toyota Music Factory and the DART Orange Line to DFW Airport.
Neighborhood guides
Three Neighborhood Guides
Las Colinas, Valley Ranch and Plymouth Park each get their own page, with notes on the homes, the slabs and the floors that tend to work there.
Choosing a Floor for an Irving Home
Start with how the room is used rather than how it looks in a photo. A garage that holds two cars and a lawn mower needs texture and a tough topcoat more than a dramatic color. A home gym wants a surface that grips and wipes clean. A converted garage or a living space on slab is where a metallic finish earns its place.
Next, think about light. Irving garages that face west get strong late-day sun, so a UV-stable topcoat is worth it. Rooms with little natural light look brighter with a light gray or white flake blend. Dark solid colors look striking but show dust and footprints sooner.
Finally, be honest about maintenance. A full flake floor forgives a week without sweeping. A dark gloss floor does not.
Our Services in Irving
- Residential Epoxy Flooring
Garages, laundry rooms and home gyms in every part of Irving, with UV-stable topcoats for sunny doors.
- Epoxy Floor Coating
The full system explained: grinding, crack repair, base, broadcast and topcoat.
- Metallic Epoxy
Decorative floors for open living spaces, offices and showrooms.
- Commercial Epoxy Flooring
Service bays, warehouses, kitchens and lobbies, scheduled around business hours.
Local favorites
Floors Irving Homes Ask For Most
Two-car flake garage
The most common request across the city, usually in gray or tan blends with a clear topcoat.
Home gym or workshop
Solid color with grit, so weights, benches and tools have a clean, grippy surface.
Metallic living space
In newer homes and condos with open plans on slab, metallic floors replace carpet or tile.
Business floors
Lobbies, service bays and back rooms across the commercial corridors.
Planning Around Irving Weather
Spring and fall are the easiest seasons for coating work, with mild temperatures that give resins a steady cure. Summer work is done too, often early in the day, because a slab in a closed garage can run hot. On the hottest days, installers adjust batch sizes and products so the resin does not set too fast.
Winter cold fronts slow curing, so return-to-use times can stretch. Your estimate includes a realistic timeline for the season.
Rain matters too. After heavy spring storms, slabs can hold moisture for a while, so installers check the concrete before they start rather than relying on the forecast alone.
How an Irving Estimate Works
Call or send the form with the room, the approximate size and a few photos if you have them. You will talk through how the space is used and what finish you have in mind, and then get a written estimate that lists preparation, repairs, the system and the topcoat. There is no cost and no obligation.
If you are comparing quotes from several companies, ask each one for the same details: preparation method, repairs, product type, number of coats and topcoat. That makes the comparison fair.
Questions
Epoxy Flooring in Irving: Questions
Have a question that is not here? Phones are open every day, 8:30 am to 7 pm: (469) 484-6547.
Do you cover all of Irving?
Yes, the whole city, including Las Colinas, Valley Ranch, Plymouth Park, the Heritage District and the neighborhoods along SH 183 and SH 114.
What is the most popular floor in Irving?
A two-car garage with a full flake broadcast and a clear topcoat, usually in a gray or tan blend.
Do older Irving garages need extra work?
Often, yes. Slabs from the 1950s and 1960s tend to have more cracks, stains or old paint, which are removed or repaired during preparation.
Can you work with my HOA?
Yes. Tell us about any HOA rules on work hours or parking, and the schedule will follow them.
How soon can I use the floor?
Light foot traffic is usually possible within a day, and vehicles after several days, depending on products and temperature.
Do you serve businesses in Irving too?
Yes. Commercial floors are covered across the city, including Las Colinas offices and the industrial areas near the highways.
Can you match a floor color to my cabinets?
Flake blends and solid colors come in many shades, and samples help you match cabinets, walls or trim before you decide.
Rolled out right.
Get a Free Estimate Anywhere in Irving
Tell us your neighborhood, the room and how you use it. A written estimate follows, free and with no obligation.
No-cost estimate, no commitment · call 8:30–7, Monday through Sunday