Irving Epoxy Flooring Pros home

Garages and home floors

Residential Epoxy Flooring and Garage Floors in Irving, TX

Turn a dusty, stained garage or a plain concrete room into a floor you are glad to show off. Flake, solid and metallic systems for Irving homes.

Tan flake floor in an open two-car garage with shelving and a water heater

Why Irving Homeowners Coat Their Garages

In a lot of Irving homes the garage is the real front door. It is where groceries come in, where kids drop their bikes and where the car drips rainwater after a storm. Bare concrete soaks up every stain, sheds fine dust that ends up in the house and looks worn long before the rest of the home does.

A residential epoxy floor fixes all of that at once. The surface seals, so oil and spills wipe up. The dust stops. The garage brightens because the floor reflects light instead of absorbing it, and a flake finish hides the small marks that come with daily use.

The same systems work indoors, in laundry rooms, mudrooms, home gyms, workshops and converted garages. For living areas with a decorative goal, see metallic epoxy.

Is a Residential Epoxy Floor Right for You?

A strong fit when

  • Your garage floor is stained, dusty or just looks tired
  • You want an easy-to-clean floor for a home gym or workshop
  • You are getting the house ready to sell and want the garage to stand out
  • A laundry room or mudroom sits on bare or painted concrete

Talk it through first if

  • Water comes up through the slab after rain
  • The garage door faces west and you only want plain epoxy with no UV topcoat
  • You need to park inside again the same evening
  • The floor already has a peeling coating nobody wants to remove

Options

Garage and Home Floor Options

Most homes choose one of these four. The finish can be matched to cabinets, walls or the color of the house.

  1. Full flake garage

    Vinyl chips broadcast to full coverage over a colored base, then sealed. Textured, grippy and very forgiving of dust and tire marks.

  2. Partial flake

    A lighter scattering of chips over a solid base. Cleaner looking, with a little texture and color variation.

  3. Solid color with grit

    One even color, often light gray, with fine grit in the topcoat. Popular for home gyms, workshops and laundry rooms.

  4. Metallic accent

    A metallic finish for a show garage or a converted space. More decorative, and best on a very flat slab.

The detail that matters

Hot Tires, Sun and the Topcoat Question

The hardest thing a garage floor faces in Irving is a hot tire. After a summer drive the tires come home warm and soft, and when they cool on the floor they can grab a weak coating and pull it up. This is called hot-tire pickup, and it is the most common complaint about store-bought garage kits.

The cure is a properly ground slab, a resin system with real thickness, and a topcoat built for vehicle traffic. If the garage door faces west or south and stays open in the afternoon, a UV-stable polyaspartic or polyurethane topcoat also keeps the floor from yellowing near the door.

Ask any installer how they handle both problems. The answer should mention grinding, film thickness and the topcoat by name.

Close view of a black, gray and white flake garage floor at the threshold, a pickup in the driveway

The playbook

Your Garage, Start to Finish

  1. Clear the floor

    Everything comes off the floor. Shelving and cabinets that stay are noted on the estimate.

  2. Grind and clean

    The slab is diamond-ground and vacuumed, including along walls and the door threshold.

  3. Fix cracks

    Cracks and chips are filled so the finished floor reads as one surface.

  4. Color and flake

    The base goes down and flake is broadcast, or the solid color coat is applied.

  5. Seal

    The clear topcoat goes on, with grit added if you want more traction.

  6. Move back in

    Light foot traffic usually within a day, vehicles after several days depending on the products.

Pricing

What Affects the Cost of a Garage Floor

Your estimate is written for your garage, but these are the items that change the number:

  • Garage size

    A one-car, two-car or three-car garage, plus any storage bays or workshop extensions.

  • Slab condition

    Deep cracks, pitting, oil stains or old paint add grinding and repair time.

  • Flake coverage

    Full broadcast uses more material than a partial scatter, and it hides more.

  • Topcoat

    UV-stable and multi-coat topcoats cost more and last longer.

  • Extras

    Stem walls, steps into the house and the driveway apron add detail work.

No price list here: two garages the same size can need very different prep. Your estimate itemizes it at no cost.

Garage Floors Across Irving Homes

Irving's housing ranges from the 1950s ranch homes around Plymouth Park to the 1980s and 1990s neighborhoods of Valley Ranch and the townhomes and condos of Las Colinas. Older slabs tend to carry more cracks and old paint; newer ones may still have the curing compound from construction. Both are handled during preparation.

HOA rules in some communities limit when work can happen or where equipment can park. Mention your HOA when you ask for an estimate so scheduling can account for it.

Care

Keeping a Coated Garage Looking New

Sweep or use a leaf blower to clear grit, then mop with warm water and a mild cleaner when needed. A squeegee pushes rainwater out the door after a storm. Clean up oil and coolant drips instead of letting them sit.

Use pads under motorcycle kickstands and jack stands, and avoid dragging heavy toolboxes. Most coated garages need nothing more than that to stay clean for years.

Questions

Residential Epoxy Flooring: Common Questions

Have a question that is not here? Phones are open every day, 8:30 am to 7 pm: (469) 484-6547.

How much does it cost to epoxy a two-car garage?

It depends on the slab, the repairs and the system. A full flake system with a clear topcoat costs more than a single color coat, and lasts far longer. The free estimate gives you a written number.

How many gallons of epoxy do I need for a two-car garage?

It depends on the product's coverage rate, the thickness and the number of coats. Professional systems use far more material than a single store kit, which is part of why they last.

What is better than epoxy for a garage?

Many garages get an epoxy base with a polyaspartic topcoat, which combines a strong bond with better UV and abrasion resistance. Full polyaspartic systems cure faster.

Is a flake garage floor slippery?

Flake adds texture, so it is less slippery than a smooth gloss floor. Fine grit in the topcoat adds more grip if you need it.

Will epoxy hide the cracks in my garage?

Cracks are filled and ground flush, so most disappear under a flake finish. Because clay soils keep moving, a hairline may reappear in time.

How long before I can park on a new garage floor?

Usually several days, depending on the products and the temperature. You will get a clear return-to-use date with the estimate.

Residential Epoxy Flooring Around Irving

The same system is offered in every area below. Pick yours for local notes.

Rolled out right.

Make the Garage the Best Floor in the House

Send the garage size and a few photos if you have them. The free estimate covers the system, the repairs and the timeline.

Get a Free EstimateCall (469) 484-6547

No-cost estimate, no commitment · call 8:30–7, Monday through Sunday

Call nowFree estimate